Drafting Blog

Designing a home with a “SIPS” wall system?

“Sips” is an acronym. It means “structurally insulate panels”. These panels consist of a layer of thick urethane foam that is sandwiched between two layers of 1/2″ plywood. The panels can come in several thicknesses but is most popular in the 4 1/2″ width. This exterior only wall system is used in place of the […]

Total New Home Construction Cost

Since I have been designing and drafting homes here in Wichita, one of the first question that clients ask is, “How do I know if I can afford a home this size?” Here is my recommendation. Clients must first decided upon an amount they are willing to invest into a new home. Then they need the help of an experienced builder. They should meet with the builder […]

Planning a Home with Future Handicapped Features

A home designer should provide more than just larger doors and hallways for the handicapped. It isn’t difficult to incorporate handicap features into your new home. The features will go unnoticed if you find a good designer. Take your time to find the right designer for your home. Door steps can be eliminated in a home design. Top-bearing floor […]

Design your home together, quickly

The advances of computerized drafting are wonderful. They allow clients to, literally, look over my shoulder while I make all revisions to a set of plans. Gone are those days where I would have to separately record the instructions on what to revise and then edit a draft for the homeowner to review at a later date. […]